This work investigates the combustion of porous Al/CuO thermites, i.e. nanolaminates fabricated with various densities of micron sized air-filled pores in the range of 0-20 vol%. High-speed videography and pyrometry of the high-temperature propagating flame were used to analyze the effect of porosity on propagation velocity. Incorporating micron sized pores in Al/CuO nanolaminates results in a faster burn rate (burn rate enhancement of 18% for pores loading of 20 vol%) while the flame temperature remains the same. Microscopic observations of the flame front in porous nanolaminates show hot-spots around each pore in the upstream of the flame but no advection. Conduction remains the dominant heat transfer mechanism in dense thermite configuration (80 % TMD) and the causes of burn rate enhancement when pores are 2 embedded into the nanolaminate are found to be the convection of the trapped air inside the pores upon heating together with a possible modification of the reaction chemistry leading to a lowering of the ignition threshold of thermite around each micron sized pores. Indeed, this hot gaseous O2 species trapped into the pores diffuse and react with solid Al on the inner wall of the pores to form Al2O3. This This gas phase mediated reaction mechanism in the pores occurs at a lower temperature than the diffusion-based mechanism of the aluminum cations and oxide anions across the alumina shell as in fully dense Al/CuO nanolaminates. The critical size of the pores beyond which their beneficial effect disappears is difficult to estimate, but, this study showed that 100 × 100 µm² pores has almost no effect on the combustion with an average burn rate increase of only ~4% compare to fully dense nanolaminate part.