Implementation of Integrated VCSEL-Based Optical Feedback Interferometry Microfluidic Sensor System with Polymer Microoptics - LAAS - Laboratoire d'Analyse et d'Architecture des Systèmes Access content directly
Journal Articles Applied Sciences Year : 2019

Implementation of Integrated VCSEL-Based Optical Feedback Interferometry Microfluidic Sensor System with Polymer Microoptics

Abstract

Using the optical feedback interferometry (OFI) technique, we demonstrated a miniaturized and compact sensor system based on a dedicated optical source for flowmetry at the micro-scale. In the system, polymer microlenses were integrated directly on a VCSEL (vertical-cavity surface-emitting laser) chip and the microfluidic channel chip surface using polymer-based micro-fabrication technologies. In particular, at a post-process stage, we integrated a collimation lens on a VCSEL chip of small dimensions (200 µm × 200 µm × 150 µm). This process was enabled by the soft-printing of dry thick resist films and through direct laser writing technology. We performed flow rate measurements using this new compact system, with a conventional bulk glass lens configuration for system performance evaluation. A maximum 33 dB signal-to-noise ratio was achieved from this novel ultra-compact system. To our knowledge, this is the highest signal level achieved by existing OFI based flowmetry sensors.
Fichier principal
Vignette du fichier
applsci-09-05484.pdf (3.62 Mo) Télécharger le fichier
Origin : Publication funded by an institution
Loading...

Dates and versions

hal-02429139 , version 1 (06-01-2020)

Identifiers

Cite

Yu Zhao, Qingyue Li, Jean-Baptiste Doucet, Pierre-François Calmon, Fabien Mesnilgrente, et al.. Implementation of Integrated VCSEL-Based Optical Feedback Interferometry Microfluidic Sensor System with Polymer Microoptics. Applied Sciences, 2019, 9 (24), pp.5484. ⟨10.3390/app9245484⟩. ⟨hal-02429139⟩
183 View
28 Download

Altmetric

Share

Gmail Facebook X LinkedIn More