Locally Ion Implantation and Annealing Effects in Diamond - LAAS - Laboratoire d'Analyse et d'Architecture des Systèmes Access content directly
Conference Papers Year : 2022

Locally Ion Implantation and Annealing Effects in Diamond


Diamond has demonstrated interesting properties for high power applications. However numerous technological obstacles make difficult the fabrication of power devices on diamond. Diamond doping in-situ gas phase is today the most efficient technique. In fact, the possibility to dope locally by ion implantation is indispensable for establishing a diamond manufacturing chain in particular to achieve the highest possible doping. In 2014 successful incorporation of implanted phosphorus in (100) diamond donor sites show promising perspectives to process convinced implanted n-type doping ("Arsenic-bound excitons in diamond" Physical Review B 89 (2014) 045201J. Barjon, F. Jomard, S. Morata). However, the absence of dopant electrical activation after implantation and thermal annealing is a technological obstacle to be removed to achieve localized n-type and p-type doping. In this work, we focus our attention on boron over-doped implanted diamond layer. We performed implantation on (100)-oriented diamond single crystals by high temperature beam line ion implantation and by beam line followed by a coimplantation plasma immersion ion implantation (PIII). The boron depth profiles in the implanted diamonds are measured by secondary ion mass spectrometry (SIMS). They confirm an almost constant concentration of implanted species at a 200 nm depth (box-profiles): 1.6×10 20 B/cm 3 for high temperature implantation. Plasma immersion ion implantation (PIII) add a boron concentration peak of 2-3×10 20 B/cm 3 at diamond extreme surface. Transmission Electron Microscopy (TEM) images performed on as implanted samples indicate damages on diamond crystal induced by implantation, but no amorphization. After high thermal annealing at 1700°C during 30 min, SIMS analysis evidences the loss of the boron surface peak obtained by PIII while diamond recrystallization is observed by TEM together with an increase of the diamond surface roughness. The comparison between the four-probes measurements on as implanted samples and after annealing shows a decrease of the measured sheet-resistance. This demonstrates a benefit of thermal annealing on the electrical activation of implanted boron. Electrical characterizations of Hall bars, TLM patterns and Schottky diodes will complete these first results to evaluate the efficiency of both boron implantation and annealing conditions. Phosphorus implantation in (100) diamond crystals being also under study, interesting and promising preliminary results will be also presented.
No file

Dates and versions

hal-03766749 , version 1 (05-10-2022)


  • HAL Id : hal-03766749 , version 1


Karine Isoird, Josiane Tasselli, Yohann Spiegel, Raid. Gourad, Fuccio Cristiano, et al.. Locally Ion Implantation and Annealing Effects in Diamond. E-MRS 2022 Fall Meeting., Sep 2022, Warsaw, Poland. ⟨hal-03766749⟩
22 View
0 Download


Gmail Facebook Twitter LinkedIn More